VENTSAFE™ Life Saving Ventilation for the Treatment of ARDS

The goal of this Phase 1 SBIR project is to develop and test a bidirectional synchronous flow-controlled ventilation system to improve oxygenation and ventilation in Acute Respiratory Distress Syndrome (ARDS). Respiratory failure is a significant cause of mortality, leading to one million deaths annually worldwide1.

Respiratory pandemics are frequent and lead to profound mortality with conventional therapy alone. Conventional ventilation (CV) induces and potentiates alveolar trauma through numerous well-established mechanisms of ventilator-induced-lung-injury (VILI) including: volutrauma, barotrauma, and atelectatic-trauma.

We propose to develop a ventilation system that has a lower potential for trauma and reduced need for sedation and paralysis. VENTSAFE™ has the potential to provide gentle lung ventilation without the damaging effects of CV. Instead of artificially expanding and collapsing the lung, the system performs gas exchange at tightly

controlled, near-static pressures. VENTSAFE™ technology overcomes the shortcomings of existing high frequency ventilation systems by employing a bidirectional synchronous flow-controlled ventilation system. Our device allows for much higher frequencies than existing technologies creating a near-static low amplitude

pressure wave. Using a rudimentary device and a physical test system, along with results from computational fluid dynamics (CFD) airflow analysis, we have preliminary data demonstrating that our system is able to deliver bidirectional synchronous flow-controlled, ventilation from the Endotracheal tube inlet at a near-static pressure

while circumventing trauma that is common from conventional ventilators. This should translate into lower sedation requirements and eliminate risk of breath stacking. We will test the hypothesis that a bidirectional synchronous flow-controlled ventilation system will demonstrate improved oxygenation and ventilation in an

ARDS lung model. To test this hypothesis, we will conduct the following specific aims: Aim 1. Perform CFD analysis. Milestone: Design demonstrates equivalent or improved ability to oxygenate and ventilate (simulated expired CO2 and O2) compared to CV forces in a CFD lung model. Aim 2. Develop a robust experimental

prototype. Milestone: Device demonstrates ability to maintain and adjust mean airway pressure with the ability to effectively clear CO2 on a physical lung model. Aim 3. Preclinical and benchtop test of VentSafe™ ventilation system in both native and damaged lung models compared to conventional ventilation.

Milestone: Demonstrate improved oxygenation (>5mmHG PaO2 increase) and improved ventilation (>5mmHG PaCO2 decrease) with arterial blood gas analysis (ABG) at specific time intervals compared to convention ventilation system (p